Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Centennial?
Spring replacement in Centennial typically costs $180 to $340 for one spring, and that’s the estimated range for the job done right by a trained technician. Most garages here have two springs that share the load, and since they wear at the same rate, a matched pair is usually replaced together. A pair runs about twice the single-spring range, so roughly $360 to $680. The written estimate we give you after looking at your door sets the final price.
Springs are under extreme tension. They hold the entire weight of the door, and when one lets go it’s loud, sudden, and genuinely dangerous to work on without the right tools and training. This is not a DIY repair, and it’s a job many general handymen won’t touch. It’s a named specialty for us, handled by technicians who work on torsion and extension springs every week.
If your door won’t lift, call (844) 575-1130. Estimates are free, we offer same-day service, and when the door won’t move, we do.
Spring Replacement Cost Breakdown (2026)
Here’s what each part of a typical spring job runs in the Centennial market. These are estimated ranges, not fixed prices. Your door’s size, the spring type, and what else we find worn out on inspection will shift the number up or down. These ranges match what we quote across every page on this site so you’re never comparing apples to oranges.
| Job or Part | Typical Estimated Range |
|---|---|
| Spring replacement (one spring) | $180 – $340 |
| Spring replacement (matched pair) | $360 – $680 (about twice the single) |
| General garage door repair | $150 – $600 |
| Cable repair (often done with springs) | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What drives the price up or down. The biggest factor is how many springs you have and whether we’re replacing one or the pair. A single torsion spring on a smaller door sits at the low end. A two-spring setup on a wide, heavy double door pushes toward the top. The type of spring matters too: torsion springs (the wound coil above the door) and extension springs (the stretched springs alongside the tracks) are different animals, and one takes more labor than the other. If a snapped cable or a bent track turns up at the same time, we fold that into the same visit so you’re not paying for two trips. Brand matters less than door weight and spring type, but if your door is a Clopay, Amarr, Wayne Dalton, or Raynor, our technicians already know how that hardware is configured before they open the toolbox.
What Affects Spring Replacement Pricing in Centennial
Every garage is a little different. Here’s what actually moves the number when we quote a spring job in Centennial.
- One spring vs. a pair. A single spring runs $180 to $340. A matched pair runs about double. We usually recommend replacing both at once because springs that were installed on the same day wear out around the same time. Swap one now and the other often fails months later, which means a second service call and a second charge.
- Door weight and size. A single-car door with a lighter panel needs a lighter spring. A wide double door with an insulated panel, common in the newer builds across Centennial, carries more weight and needs a heavier spring, which costs more to supply and install.
- Torsion vs. extension springs. Torsion springs sit above the door and are the standard on most modern setups. Extension springs run along the sides. Torsion work takes more precision and slightly more labor, so it tends to price higher on the range.
- What else is worn. When a spring breaks, the sudden snap can damage a cable, knock a roller loose, or pull the track out of line. If we find that on inspection, we’ll quote the extra repair up front. A cable repair adds $130 to $250, roller replacement $110 to $220, and track realignment $120 to $240.
- Whether you need emergency service. A spring that fails and leaves your car trapped or your home unsecured can’t always wait for a standard appointment. Emergency garage door service is a real offering here, and it’s priced based on the job and the timing. Call and we’ll tell you what’s involved.
- Door condition overall. On a door that’s seen a lot of seasons, we may find a panel or worn hardware that should be handled in the same visit. A panel runs $250 to $500. Fixing it all at once usually costs less than three separate calls.
How Spring Replacement Works (and Why It’s Not a DIY Job)
A torsion spring stores an enormous amount of energy. It’s wound tight enough to lift a door that weighs well over a hundred pounds, and it releases that energy in an instant if it’s worked on wrong. Technicians use winding bars and specific procedures to release and re-tension it safely. Cutting corners here can mean serious injury, not just a door that doesn’t work.
Here’s how a spring job usually goes: we identify the spring type and size, measure the door’s weight and the existing spring’s wire gauge and length, and match a replacement to the door. We release the tension safely, remove the old spring, install and wind the new one, and then test the door’s balance by hand. A door that’s properly balanced should hold itself open about halfway. If it drops or races up, the spring tension needs adjustment. Then we check the opener’s force settings, since a new spring changes how much the opener has to work.
That last step is where a specialist helps. Your LiftMaster, Chamberlain, Genie, or Craftsman opener has force and travel limits that need to match the door. We work on the brand already in your garage and set it up correctly rather than leaving you with a door that slams or won’t close all the way.
How Much Does Spring Replacement Cost in Centennial Compared to Other Repairs?
It helps to see the spring job next to the other common repairs. Spring replacement is often a mid-to-high cost repair, but it’s also one that restores full function to the door. If you’re weighing options, here’s how the numbers stack up:
- General garage door repair: $150 – $600
- Spring replacement, one spring: $180 – $340
- Cable repair: $130 – $250
- Opener repair: $120 – $320
- New door installation: $700 – $2,200
Repair almost always costs less than replacement when the door panels and frame are sound. A broken spring doesn’t mean the door is finished. If you’re staring at a sagging door and wondering whether to fix or replace, our Garage Door Repair Centennial Pros team can look at the whole door and tell you honestly which makes more sense. A spring job on a solid door is far cheaper than a new door.
How to Save on Spring Replacement
You can’t dodge the cost of a broken spring, but you can keep the bill from creeping up. A few practical moves:
- Replace the pair, not just the broken one. It feels like spending more up front, but it avoids a second service call when the other spring fails. Two separate visits usually cost more in total than one job that replaces both.
- Bundle worn parts into the same visit. If the rollers are shot or the cables are frayed, handle it while we’re already there. Roller replacement is $110 to $220, and a cable repair is $130 to $250. Add-ons during a spring job beat a separate trip later.
- Get a written estimate before work starts. We quote the price up front, and the written estimate sets the final price. No surprise add-ons after the job.
- Act when you notice symptoms. A door that’s getting heavy to lift, or that bangs or won’t stay open on its own, is telling you a spring is losing tension. Fixing it while it’s still a planned repair beats an emergency call when it snaps.
- Ask about the estimate. Estimates are free. Call (844) 575-1130 and we’ll look at the door and give you a number before you commit.
When Should You Call Us?
You’ll usually know. A loud bang from the garage, a door that won’t lift more than a few inches, or a door that feels suddenly heavy. If your car is trapped inside or the door won’t close and your home is open, that’s an emergency in our book. When the door won’t move, we do.
If you’re planning ahead and the door is still working but sluggish, that’s a good time to get it checked before it fails. Our spring replacement page lays out what the job involves from start to finish.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Centennial?
Spring replacement in Centennial typically costs $180 to $340 for one spring, and $360 to $680 for a matched pair. The written estimate sets the final price. Call (844) 575-1130 for a free estimate.
Is it cheaper to repair or replace a garage door with a broken spring?
Repair is almost always cheaper. A spring job runs $180 to $340 for one spring or about double for a pair, while a full new door installation is $700 to $2,200. If the panels and frame are solid, repair makes far more sense. Call (844) 575-1130 and we’ll tell you which fits your door.
Can you come today if my spring broke?
Often yes. We offer same-day service and emergency garage door service for failures that can’t wait. We’re open Sunday through Friday, 7am to 7pm, and closed Saturday. Call (844) 575-1130 and we’ll get you booked.
Do I have to replace both springs at once?
You don’t have to, but we usually recommend it. Replacing one spring costs $180 to $340, and a pair runs about twice that. Springs installed together wear out on a similar timeline, so replacing both now avoids a second call later. Call (844) 575-1130 to talk through your setup.
Are you open on Saturday or weekends?
We’re closed Saturday and open Sunday through Friday, 7am to 7pm. If a spring fails on a Saturday, call and we’ll book you for Sunday. Call (844) 575-1130.
Springs Are a Specialty, Not a Side Job
Spring work is one of the repairs we’re known for. It’s high-tension, it’s safety-critical, and it’s the kind of job that a general handyman either avoids or hires out. Our technicians have up to 15 years of experience and handle torsion and extension springs in-house, on whatever brand door you have. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor. We also cover the other side of the system, so if your opener needs attention too, you don’t need a second contractor.
That matters more than it sounds. A spring job isn’t done until the door is balanced and the opener is set to match. If your door is heavy, loud, or won’t stay up, the spring is the likely cause, and it’s worth a look before it lets go.
Get a Free Spring Replacement Estimate in Centennial
If your spring is broken, strained, or you’re not sure, call (844) 575-1130 for a free estimate. We’ll look at the door, tell you what needs replacing, and give you a written price up front. Same-day service is available, emergency calls are welcome, and we’re open Sunday through Friday, 7am to 7pm. Closed Saturday. Whether it’s a snapped torsion spring or a door that finally gave out, your door. Same day.
Pricing reflects the Centennial market as of 2026. Garage Door Repair Centennial Pros offers free estimates – call (844) 575-1130.
Written by the team at Garage Door Repair Centennial Pros.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Kristen Delaney"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Ramon Flores"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Dustin Thompson