Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Aurora
If you’re calling about a garage door in Aurora that’s reached the end of its run, we’re the specialist to talk to. We install new garage doors for homeowners across the city, from the mid-century brick ranches near Del Mar Park to the big builder-grade subdivisions out by E-470. We know how Aurora houses are put together and what the local weather does to the hardware. Our technicians have up to 15 years of experience, and we quote every job before we start. Call (844) 575-1130 for a free estimate.
Why Aurora Homeowners Call Garage Door Repair Centennial Pros for Garage Door Installation
Aurora garage doors take a beating, and a lot of them are simply worn out. We’re a garage-door-only company, so every call we take is about a door or an opener, never a general handyman list. That focus is why homeowners in Aurora call us back and pass our number to neighbors.
We work on the brand already in your garage. That matters in Aurora, where builder-grade Amarr, Wayne Dalton, and Craftsman doors and openers are everywhere. When you tell us what’s on the label, our technicians usually know how it’s built before they arrive.
We also handle both sides of the system: the door and the opener. You don’t need to line up two contractors. When a retrofit job needs new springs plus a new opener, we scope it as one job with one written price. That keeps the estimate honest and the job moving.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Aurora
New Door Installation
A typical new door installation in Aurora runs $700 – $2200, and the final price depends on size, material, and whether the old door needs hazmat-safe removal. When an original tilt-up wood door is warped beyond saving, replacing it is often the cheaper long-term move. Our garage door installation team measures the opening, orders the right door, and installs it to fit your current frame or a rebuilt one.

Single Car Door
Single-car doors are standard on the 1950s and 60s ranches in Aurora’s core, and they’re where we see the most legacy tilt-up and early sectional hardware. If your old single door is binding or sagging, we can retrofit the hardware or swap in a new door sized to the opening. Either way, you get a written price before we touch a thing.

Double Car Door
The 1990s and 2000s two-car homes out toward 80015 mostly have builder-grade steel doors on chain-drive openers, and many are hitting their first big replacement cycle. A new double door resets that clock. We’ll match the style to the house and the opener to the door weight so the whole system works together.

Custom Garage Door
Some Aurora homes call for something the builder didn’t offer: a wider opening, a carriage-house look, or wood to match a brick ranch. We install Raynor and other custom-capable lines, and we’ll talk through material, insulation, and window options before you commit. Custom work is scheduled, not rushed, and priced in writing up front.
Trusted Brands We Service in Aurora
We’re factory-familiar with eight of the biggest names in the business: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We don’t claim dealer status with any of them, but we do know their quirks. An older Wayne Dalton door with a worn torsion tube, a Craftsman opener with a stripped gear, an Amarr panel that’s seen too many hail seasons: our technicians have worked on all of it. When you tell us your brand, we can scope the job faster and give you a sharper estimate. No parts-stock claims. Just the right door or opener, ordered and installed right.
Common Garage Door Installation Problems We See in Aurora Homes
- Original single-piece tilt-up wood doors in 1950s-60s ranches. Warped panels and tired extension springs make these doors bind and strain the opener. A retrofit with a proper torsion system can save the opening, or a new sectional door fixes it for good.
- Hail-dented steel doors in 80013 and 80015. Denting cracks panels and breaks the weather seal, which lets in wind and water. Sometimes new panels do the job; often a full door swap makes more sense.
- Spring fatigue from dry air and freeze-thaw swings. Aurora’s temperature changes wear torsion springs faster than mild climates, and a snapped spring leaves the door unbalanced and hard on the opener gears.
- Opener gears worn by the same cycles. Builder-grade chain-drive openers that came with the house often outlive their gears before the door does. A stuck opener on an aging door is a sign to look at the whole system, not just the motor.
Pricing for Garage Door Installation in Aurora, CO
Here’s how the numbers usually land in Aurora. A new door installation runs $700 – $2200 depending on size, material, and insulation. Panel replacement is $250 – $500, and opener installation is $250 – $550. Custom wood work and heavier doors sit at the upper end. Every price is an estimate until we measure your opening and write it down. We quote the job, you agree to it, and that’s the price. If the job turns out to need more, we tell you before we start. Call (844) 575-1130 for a free estimate.
| Job | Typical Aurora Range |
|---|---|
| New Door Installation | $700 – $2200 |
| Panel Replacement | $250 – $500 |
| Opener Installation | $250 – $550 |
See the difference
Before
After
Before
After
Before
AfterWhen a Legacy Door Needs a Retrofit or a Replacement
Aurora’s garage door market splits along the city’s east-west buildout line, and the two halves fail in very different ways. In the older core, you’re often looking at a single-piece tilt-up wood door whose original extension springs have lost tension. The door sags, the opener strains, and nothing lines up right. A qualified local pro would check the door’s balance, retrofit a torsion spring system with the right drums and cables, and align a new opener rail to the existing track. If the wood frame is rotted or the panels are warped beyond straightening, a full sectional replacement is the smarter call. Our technicians have up to 15 years of experience reading this exact kind of wear.
Out toward 80013 and 80015, the story is hail. The same storms that make this a busy roofing market dent and crack steel and aluminum garage panels across the east side. After a hail event, entire subdivisions get door panels replaced in clusters, because dented steel doors are visible from the street and neighbors start calling together. That makes door replacement an insurance-adjacent, block-level event in Aurora, unlike the gradual spring-and-opener failures in the older core. If your steel door took a hit, we can assess whether panels will do or whether the whole door should go.
In both halves of Aurora, the same weather works the hardware. Freeze-thaw swings and dry air accelerate spring fatigue and knock tracks out of alignment, and the big temperature changes wear opener gears faster than in a mild climate. That’s the case for looking at the door and the opener together, not just the part that failed.
We Also Serve Cities Near Aurora
We install and service garage doors in Four Square Mile, Centennial, Cherry Creek, and Greenwood Village, as well as throughout Aurora. If you’re just outside the city line, call and we’ll confirm coverage. Same written estimate, same brand-familiar technicians.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Aurora
It depends on the wood frame and the door’s balance. If the frame is sound, a torsion retrofit with proper drums and cables often brings the door back to smooth operation at a lower cost than a full replacement. If the panels are warped or the frame is compromised, a new sectional door is the better long-term move. Call (844) 575-1130 for an assessment and a written price.
Often yes, if the dents are isolated to one or two panels and the frame is straight. Panel replacement runs $250 – $500, and it restores the weather seal without replacing the whole door. If the dents are widespread or the door is old and unstable, a full door swap (starting at $700) may make more sense. Either way, we quote it in writing before work starts. Call (844) 575-1130 for a free estimate.
Repair usually wins if the motor runs and the problem is a stripped gear, a remote issue, or a misaligned rail. Replacement is the better call when the motor is failing or the opener is undersized for a heavier door. Opener installation runs $250 – $550 in Aurora. Call (844) 575-1130 and we’ll tell you straight.
Most Aurora homeowners do well with an insulated door in the middle of the range, since the climate’s temperature swings make an uninsulated steel door work harder. We’ll walk you through insulation options for your home without overselling. Call (844) 575-1130 for a free estimate on an insulated door.
They can be, but they’re past their expected life and should be checked. Springs are under extreme tension, and a snapped extension spring can cause serious injury. This is not a DIY repair. We handle spring retrofit in-house with trained technicians. Call (844) 575-1130 to schedule an inspection.
Get a Free Estimate on Your Aurora Garage Door
Whether you’re deciding between a retrofit and a full replacement on a legacy door, or weighing panels against a new hail-resistant steel door, we’ll give you a straight answer and a written price. We quote before we start, and the written estimate sets the final price. Call (844) 575-1130 for a free estimate on garage door installation in Aurora.
Written by the team at Garage Door Repair Centennial Pros.